solar ground mounting system

L feet solar metal roof mounting 50*80mm L foot solar accessory

The L-Foot solar bracket design provides a low-cost solar mounting system.
  • Brand:

  • Shipping Port:

  • Material:

    Aluminum 6005-T5 & SUS 304 Stainless Steel
  • Warranty:

    10 Years
  • Service Life:

    25 Years
  • Certification:

  • Standard:

    AS/NZS 1170
  • Wind Load:

  • Snow Load:

  • Product Detail

L feet solar metal roof mounting 50*80mm L foot solar accessory

Quick mount pv solar panel and Kseng have the complete pitched roof mounting system, L-foot and rail combine seamlessly to provide a complete, our mounting solution backed by a 25 years product service life and 10 years warranty.

Our L-feet mounting system merits are the low price, easy installation and lightweight. 

Our L-foot solar panel mounting system have the another name: the Fast-Rack Rail System that is designed to speed the installation of solar PV arrays on (pitched) sloped roofs with a minimum number of roof penetrations.

roof mounting details.png




  Material:  Aluminum 6005-T5& SUS 304 Stainless Steel
  Application:  Roof
  Standard:  AS/NZS 1170
  Certification:  ISO9001/UL/CE/SGS
  Pv Modules:
  Framed or Frameless
  10 Years
  Service Life:  25 Years
  Components:  50*80mm L foot, Bolt, End Clamp, Middle Clamp, Rail, Rail Splice etc.

roof mounting step.png


1、Drill a hole in the right position as planned, install the EPDM rubber and L-bracket, then screw the bolt into the wooden beam below.

2、Section of L-bracket after installation. Please be careful during installation, not destroy the steel below.

3、Mount the clamp and L-shaped bracket to the roof rail.  confirm and tighten the bolts. Both rails must be on the same level.


4、The module is secured to the roof rail by end clamps. As shown on the right. First, the panel is placed flat on the rail, then the rail clip is snapped into the rail slot and finally the end clamp kit is installed.

5、Portrait solar panel, Solar panel Length(should check the solar panel install instruction). Landscape solar panel, solar panel width.

6、L-bracket horizontal spacing can be up to 2m. L- bracket upward spacing is about 1/2 or 3/4 the length of solar panel. Spacing between solar panel:18mm.

roof project case.png


Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Solar Structures
Korea metal roof solar mounting bracket pv mount structure
Customized metal roof mounting system,  korean customer is required to design the solar mount high structure.
Roof Hooks
Pitched tile roof-mounted accessories solar roof hook kits
Pitched tile roof mounting always use roof hooks(pantile hook), In view of many years of experience, the many selection of different accessories and systems enables secure with Kseng systems to almost any PV module configuration on each roof.
Adjustable Triangle Roof Mounting System
Aluminum Triangle Adjustable Angle Solar Panel Roof Mounting System
Aluminum triangle adjustable angle solar panel roof mounting system can be implemented on open ground attached to concrete foundations,or on a metal roof with a low angle of slope for that extra strength.
Ballast Roof Bracket
Flat roof ballasted mountig bracket system
Flat roof ballasted solar mount racking system are widely applied in residential,commercial and utility solar systems.
frameless end clamp
Thin-film module end clamp
The Thin film solar panel end clamp can be used for kinds of specification thin film solar panel or unframed solar panel. 
Solar Rail Mount Clamps
Rail Free Mount Clamps for Trapezoidal Metal Roof Solar Mounting
The trapezoidal roof mounting system is rail free, so it can save cost price and easy to installation.
Solar Mounting Systems For Metal Roofs
Aluminum Roof Clamp for Metal Roof Solar Mounting System
The roof clamp is suitable for solar panel installation on trapezoid metal roofing.
thin film mid clamp
Thin film solar mid clamp for frameless solar panel
Frameless glass panel thin film clamp which can be used for standard size solar thin-film module.

click here to leave a message

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.