To promote a clean, low-carbon and efficient energy system construction, our country develop renewable energy and scaled construction base vigorously. As a PV power station project in a special environment cannot be completed manually. Compared to fixed mounting system, using low energy consumption, high precision and high stability solar tracking system becomes the best solution. What is tracking controller? Tracking controller is the core of solar tracking system. The control system calculates the real-time position of the sun intelligently and adjusts it automatically according to GPS positioning and latitude and longitude. To ensure the surface of PV modules receives maximum sunlight. The system will keep track of the sun's position and drive the motor steadily, realize the automatic operation of PV brackets and modules, and improve the power generation efficiency and revenue. Why choose tracking controller?   ① High precision: The tracking Angle is controlled by astronomical algorithm +AI control, the structure is designed to overcome the rotating center of gravity, and the tracking accuracy is controlled within ±1°. ② High power generation: Using double-sided panels + tracking system, the power generation is 15%-30% higher than by fixed mounting system. ③ Intelligent wind resistance: Tracking controller control the tracking angle according to the wind strength and AI intelligence , adopt the windward side to resistance wind, while protecting the bracket, maximizes power generation. ④ Smart Weather Protection: Efficient SCADA support, The working mode can be switched intelligently under different weather conditions, no affected by rainy, windy and snowy days, ensure that the system can quickly adapt to various operating environments. ⑤ Man-machine interaction: Control system equipment has visual man-machine interaction interface, interface is simple and easy to operate, improve the efficiency of operation and maintenance. How to select tracking controller? 01 Due to the technical complexity,  insufficient of research, development ability, lack of pre-test and other problems, most tracking controllers on the market are easy to cause field failure. Kseng has an independent tracking controller production line, integrating research and production. Our products have been tested in high and low temperature, dust-proof, anti-fall, load bearing and other simulated harsh environment tests, overcome terrain and climate problem, strengthen quality control and improve the reliability of tracking controller. 02 It’s more cost-effective to choose a professional team. Customized solutions can minimize the user's budget and construction cost, also provide safe and reliable technical support for PV power stations. 03 Kseng not only provide users with tracking bracket solutions and adaptive controllers, but also unify the work efficiency of products, quickly solve pre-sales and after-sales problems, provi...

On May 24, the 2023 SNEC officially kicked off in Shanghai, attracting more than 500,000 attendees to the expo. Kseng Solar is under the spotlight by showcasing an impressive array of cutting-edge solar racking solutions and a series of well-planned live activities with diverse highlights and abundant benefits. Eye-catching Full Range Solar Racking Solutions One of the highlights of Kseng Solar’s booth was the comprehensive range of solar racking solutions for utility-scale, C&I applications, and residential scenarios. At the site, KST Solar Tracker is capturing the attention of the industry for its smart AI algorithm, great compatibility with 210 modules, and intelligent O&M. Continuous visitors were attracted and stopped by the booth to show their interest in our product. Global debut of Kseng Solar's new corporation video From solar racking & tracking systems solution provider to one-stop solution provider for solar system, Kseng Solar has been moving forward without any breaks. Check out the video “The Backbone of Sunlight” to learn about every tough step of our journey and each fearless exploration we made, to support global energy transition and zero-carbon development. Multiple strategic cooperation agreements signed As one-stop solution provider for solar system, Kseng Solar has always strived for mutual benefit and win-win cooperation with our partners, constantly improving customer experience on both the product and service sides. On the first day of SNEC, Kseng Solar held strategic cooperation agreement signing ceremony with six partners to further expand the applications of distributed photovoltaic systems by leveraging the strengths of each partner and optimizing the collective resources, aiming to drive sustainable and high-quality development of PV industries. KST Solar Tracker received TÜV Rheinland certification The innovative KST Solar Tracker Series 1P&2PM, has successfully passed all tests in accordance with IEC62817 standards on the first attempt, with all parameters exceeding the standard requirements. During the site, Mr. Dong Huajian, Senior Manager and Signatory Officer of TÜV Rheinland's Solar and Commercial Products Services Department, presented the certification certificate to KST Solar Tracker Series. This certification not only demonstrates Kseng Solar's product R&D strength but also allows continuous innovation in the future. Stay tuned for more highly-technical and specialized products in the near further! Insightful speeches about solar racking & tracking system Kseng Solar's R&D Manager, Songqin Yu, and BIPV Product Manager, Zhengxing Yuan, brought impressive presentations and in-depth analysis of the KST Solar Tracker Series and BIPV products, making a significant impact on the visitors and further enhancing the brand's image. Moreover, the continuous surprise giveaways provided during the period were extremely popular, drawing a large number of visitors to participate and making it ...

As we all know, the factory roof has always been the favorite of the photovoltaic industry. Using idle factory roofs to build photovoltaic projects can not only reduce energy consumption but also make full use of idle resources, which plays a role in energy conservation and emission reduction. It can bring huge economic and environmental benefits to the factory, which can be described as killing many birds with one stone! So, what are the specific benefits of installing distributed PV on the roof of industrial and commercial enterprises? First of all, the distributed photovoltaic power station is built on the roof of the enterprise building, and the enterprise can adopt the electricity mode of self-use and surfacing. On the one hand, enterprises preferentially use the electric energy produced by photovoltaic power stations, which reduces the electricity cost in the production process and thus reduces the energy consumption of enterprises. On the other hand, in addition to their own use, enterprises can incorporate excess electricity into the national grid, which not only contributes to social electricity consumption but also gains electricity costs, increasing the competitive advantage of enterprises. Secondly, the distributed photovoltaic power station is mainly constructed on the roof of the factory building of the enterprise, which revitalizes the fixed assets of the enterprise and exploits the idle resources of the enterprise. Thus, the idle factory roof of the enterprise can be effectively used to enhance industrial efficiency and create economic value. What's more, photovoltaic power generation is based on solar energy resources. In the process of power generation, zero output of dust, wastewater, waste residue, noise, and other pollution sources can be achieved. It not only contributes to the development of clean energy and the construction of a clean, low-carbon, safe, and efficient energy system for the country but also helps to achieve the goal of "carbon peak, carbon neutral", thus enhancing the brand image and influence of the enterprise. The basic equipment of distributed photovoltaic power generation system on the factory roof includes photovoltaic modules, photovoltaic supports, a DC confluence box, a DC distribution cabinet, a photovoltaic inverter, transformer, AC distribution cabinet, and other equipment, in addition to the power supply system monitoring device and environmental monitoring device. Its operation mode is that under the condition of solar radiation, the solar cell module array of the photovoltaic power generation system converts the energy output from the solar energy and sends it to the DC distribution cabinet through the DC confluence box. Then the grid-connected inverter converts it into AC power to supply the load of the building itself. The excess or insufficient power is adjusted by connecting to the grid. Advantages of industrial and commercial rooftops with distributed PV: 1. Make use of idle roofs to revit...

The photovoltaic vegetable greenhouse is to install solar photovoltaic modules on the top of ordinary vegetable greenhouses and uses solar energy to divide solar radiation into light energy needed by plants and light energy generated by solar power, which not only meets the needs of plant growth but also realizes photoelectric conversion. Photovoltaic vegetable greenhouses can both generate electricity and grow vegetables. The photovoltaic agricultural greenhouse is a new mode of photovoltaic application. It is a greenhouse that integrates solar photovoltaic power generation, an intelligent temperature control system, and modern high-tech planting. The greenhouse adopts a steel frame and covers solar photovoltaic modules while ensuring the lighting needs of solar photovoltaic power generation and the whole greenhouse crops. The electricity generated by the photovoltaic greenhouse power station can support the irrigation system of the greenhouse, fill the light of plants, solve the heating demand of the greenhouse in winter, raise the temperature of the greenhouse, and promote the rapid growth of crops. However, the "warming and heat preservation" of agricultural greenhouses has always been the key problem troubling farmers. And Kseng "Agricultural mounting system", is expected to solve this problem! Due to the high temperature in summer, many types of vegetables can not grow normally from June to September, and the "photovoltaic agricultural greenhouse", like adding a spectrometer to the appearance of the agricultural greenhouse, can isolate the infrared ray, prevent too much heat into the greenhouse; In winter and night, it can prevent the infrared band of light in the greenhouse from radiating outward, reduce the speed of temperature drop at night, and play the role of heat preservation. The "distributed photovoltaic grid-connected system in agricultural sheds" can supply the electricity needed for lighting in agricultural sheds, and the remaining power can also be connected to the grid. The off-grid form of the "farm shed photovoltaic system", can be coordinated with the LED system, during the day to prevent light to ensure the growth of plants, while generating electricity; The night LED system uses electricity generated during the day to provide lighting.

From May 16 to 18 in Poznań, Poland, Kseng Solar made an appearance at GreenPower 2023, the most comprehensive presentation of the renewable energy industry companies in the country. Kseng Solar’s all-scenario solar mounting systems came into the spotlight and attracted thousands of visitors during the three-day expo. Notably, Kseng Solar has set up a local logistics center in Poland, ensuring timely service and better experiences for clients in Poland and its neighboring regions. Presented Products - Easy Solar Bracket: Universal Easy Solar Bracket, Balcony Easy Solar Bracket - Solar Roof Mounting Solutions: Universal Rapid Solar Metal Roof Mounting System, L feet Solar Metal Roof Mounting System, Standing Seam Roof Mounting System - Solar Ground Mounting Solutions: Aluminum Ground Mounting System, Steel Ground Mounting System According to the Polish research institute Instytut Energetyki Odnawialnej (IEO), the Polish PV market is expected to grow strongly in the current decade, reaching 30 GW of installed capacity by the end of 2030. Based on comprehensive local service and competitive solar racking solutions, Kseng Solar is committed to supporting the country's clean transition towards a carbon-zero future through quality products and strong partnerships. Dedicated to providing solar racking and tracking systems since 2015 and driven by the mission of “Empowering our world with clean energy”, Kseng Solar will continue to deliver more cutting-edge solar racking solutions and top-class customer services, to empower every household, business, and community with clean energy.

May 15-16, The Future Energy Show Philippines 2023, the largest energy event in the country, opened at SMX Convention Center Manila to bring together the entire energy community in the Philippines. Kseng Solar took part in the expo and showcased full-scenario solar racking solutions to more than 14,000 attendees from around the world, offering versatile options to satisfy various demands of local clients. Presented Products - Solar Roof Mounting Solutions: Universal Rapid Solar Metal Roof Mounting System, L feet Solar Metal Roof Mounting System, Standing Seam Roof Mounting System - Solar Ground Mounting Solutions: Aluminum Ground Mounting System, Steel Ground Mounting System According to the Philippines’ National Renewable Energy Program (NREP) 2020-2040, the country aims for renewables to comprise 35% of power generation by 2030 and 50 % by 2040. The government has released an array of incentives and supportive policies to encourage the development and use of renewable energy, Kseng Solar is there with high-efficiency solar racking solutions and ready to be part of this solar revolution. Dedicated to providing solar racking and tracking systems since 2015 and driven by the mission of “Empowering our world with clean energy”, Kseng Solar will continue to deliver more innovative solar racking solutions and top-class customer services, to empower every home, business, and community with clean energy.