As the global push to replace fossil fuels with clean energy, agrivoltaics have been applied as an alternative in land-constrained Japan. Located in Iwate Prefecture, Japan, this solar plant is one of the agrivoltaics projects, and it was reported by Nikkei BP, one of the largest providers of cutting-edge information, content, and services in Japan. Japan is aiming to be carbon neutral by 2050, however, the country has limited capabilities for renewable energy because of its mountainous terrain. Agrivoltaics offers a promising alternative to help farmers to generate solar electricity while growing crops on the same farmland. With a capacity of 540.21kW, the solar racking system provided by Kseng Solar serves the dual purpose of producing energy and planting 500 organic wine grapes. Featuring all highly anti-corrosion 6005-T5 aluminum alloy, the system is widely used for its durable structure, easy installation, and 6 meters large-span design according to the client’s request. Its annual electricity generation capacity is 503,000 kWh, approximately 90% of the generated power will be sold, and the rest will be used for self-consumption. With local branch and warehouse, Kseng Solar has supplied over 3GW solar racking shipments for the market, and had been keeping the best annual growth rate for seven consecutive years in Japan. Driven by the mission of” Empowering our world with clean energy ”, Kseng Solar will continue to deliver advanced and suitable solar solutions for different scenarios, to meet the increasingly diverse demands of the locals.

The on-construction 4MW solar plant located in Saitama, Japan, utilized a tailor-made aluminum ground mounting solution with installation angles and heights adjustable from Kseng Solar. The optimized design is provieded by Kseng Solar’s engineer team with rich experiences in coping with the complex terrain, maximizing the overall energy generation. **Project information** - Location: Saitama, Japan - Size of system: 4MW - Start of construction: September 2019 - Completion: Early 2023 - Wind Speed: 30m/s - Snowpack: 40cm - Module orientation: Vertical - Number of modules: 6384 modules - Material: Aluminum AL6005-T5 - Warranty: 10 years - Use of electricity: Grid-tied to supply energy with Feed-in tariff (FIT) program Special Features Of Kseng Solar’s aluminum ground mounting solution - Corrosion resistant and light-weight ensured by Aluminum 6005-T5 structure - Flexible designs with ground screw or concrete foundation options - Highly pre-assembled before shipment to save on-time installation time and labor cost - Featured the most aesthetic structure for ground mount solutions Find more about Kseng Solar's ground solar racking solutions here: https://www.xmkseng.com/ground-mount_c2

Recently, the 3.5MW solar canopy located in China for commercial application was completed, which will be added for electricity consumption in industrial park. As one of the popular use of otherwise unused structure and parking lot space, carport mounted solar systems serves as shelters for cars and providing energy for nearby properties. In this project, Kseng Solar provided carport structure featured with waterproof function. Adopted AL6005-T5 as main material, the system has premium corrosion resistance and aesthetic appearance. In-house production quality control ensures the high quality of carport mounting system and timely delivery. Whether your solar project is complex or simple, adopting for single car or two cars layout, Kseng Solar can offer the right solar carport system solution for you.  With over 7 years dedication in solar industry, our experienced professional team can assist you with the design of your residential or commercial use solar carport system project. Feel free to contact us for professional assistance.

The 11MW solar plant in China is under smooth installation and is expected to be completed at the end of July 2022, which utilized aluminum roof mounting structure from Kseng Solar. Project information - Location: Fujian, China - Wind Speed: 0.85 KN/㎡ - Installed: July 2022 - Size of system: 11MW - Building height: 10 meter - Module orientation: Vertical - Number of modules: 11503 modules - Material: AL6005-T5 alloy - Warranty: 10 years - Use of electricity: Self -consumption and fed into the power grid Special Features Of Kseng Solar’s trapezoid metal roof mounting system - Efficient and economical solar solution for both residential and commercial applications - Adopts Aluminum 6005-T5 structure with excellent corrosion resistance - Withstands strong wind by utilizing high-strength stainless steel components - Minimal system components allow for easy and quick installation Find more about Kseng Solar's roof solar racking solutions and check a video for this project below.

Currently, a larger number of utility-scale solar projects are being built in mountainous areas in land-scarce Japan. When it comes to mountain solar projects, the biggest concern is how to cope with rugged terrain.  Kseng solar has offered nearly 2.5GW solar racking solution in Japan, the most recently completed solar project is the 9MW solar farm in Miyagi Prefecture, Japan, which had grid-connected in March 2022. The project utilized ground-mounted system from Kseng solar, featuring with long-span and double rail which is tailor-made solution for thin-film solar panels with bifacial power generation. At the early stage of the project, Kseng solar engineering team came on-site to conduct topographic survey and offer technical support. It turned out to be the proper solution allowing for reducing the shadow from the back side and thus maximizing the energy generation of the station. With a capacity of 9217.4KW, the design of this extra-high-voltage project has been strictly audited and approved by the Ministry of Economy, Trade and Industry(METI), a ministry of the Government of Japan. Structural calculations of the system show that it‘ll provide sufficient strength to ensure safe power generation for at least 25 years. At the end of 2021, Kseng solar had accomplished more than 5GW of solar racking shipments, and had been keeping the best annual growth rate for six consecutive years in Japan market. Driven by the mission of“Empowering our world with clean energy”, Kseng solar has in-depth cooperated with strategic partners in Japan, providing products with excellent quality, rigorous design, fast delivery, and looking forward to bringing more clean energy solutions to the local.

Recently, Kseng solar has announced an order from China Huaneng Group for 10.27MW of its roof-mounted solar racking solution. Located in Gulei Port Development Zone with 8-kilometer-long, the 10.27MWrooftop distributed photovoltaic project is under smooth progress and expected to be completed at the end of May 2022. The construction of this project fully displays the perfect combination o f "roof + photovoltaic" in the economic development zone. Upon completion, it will generate 12,107MWh of green energy every year, which can reduce 12,000 tons of carbon emissions. Featured with easy to install and great flexibility, Kseng solar provide aluminum solar racking solution with various types of clamps which fit well with different standing seam. In this project , Kseng solar engineering team came on site to conduct survey and provided anti-pull force test, ensuring the reliability of whole system. Bin Yu, Kseng solar CEO, commented, “We are delighted that Huaneng energy group has chosen our solar mounting system that designed to meet the needs of distributed solar projects for all scenario. Kseng solar has its own manufacturing force and in-house R&D team, engineering-driven structure is our focus to help the industry transition to a new era of energy generation. ”