Photovoltaic power generation system is a power generation system that uses solar cells to convert solar energy directly into electric energy. Its main components are photovoltaic modules and inverters. Its characteristics are high reliability, long service life, no environmental pollution, independent power grid operation. It is favored by enterprises of various countries and has broad prospects for development. The solar photovoltaic carport mainly includes photovoltaic modules with carport roof,, which can not only meet the parking needs, but also power the grid through photovoltaic power generation, increase income, energy saving and environmental protection. Photovoltaic carport is mainly composed of bracket system, battery module array, lighting and control inverter system, charging device system and lightning protection grounding system. The system mainly includes a support post fixed between support post, a tilt beam connected to a tilt beam that supporting a solar cell module array, and a fastener fixing a solar cell module array, etc. Photovoltaic carport brackets has a variety of types, conventional can be divided into single post unidirectional,double post unidirectional , single post bidirectional type. Photovoltaic carport types are divided into double parking carport, multi-parking carport, most are modular design, can be used alone, can also be used in a variety of ways, easy to expand, from a few parking Spaces to hundreds of parking Spaces, strong flexibility. If ordinary photovoltaic modules are used, the overall cost is lower. Large installed capacity, high rate of return, short payback period. The simplest way to combine photovoltaic with architecture has become more and more popular in recent years. Photovoltaic shed good heat absorption, easy installation, low cost, not only make full use of the original site, but also provide green energy. The construction of photovoltaic carport in factory parks, business districts, hospitals and schools can solve the problem of high temperature inside outdoor parking lots in summer. By installing a system of photovoltaic modules on a sunny roof, the solar energy can be converted into electricity, which can be used to supply residential electricity or industrial electricity in factories. Rooftop power generation is different from traditional centralized ground-based photovoltaic power generation. It has the characteristics of miniaturization, dispersion, economy, high efficiency and reliability. Distributed photovoltaic power stations can be installed in sunny places, such as industrial plants, residential roofs, balconies, sun rooms, ground. Combining PV modules with the roof of the carport can save costs compared to installing PV modules on the roof of the carport. It can realize all the functions of the traditional carport, and can generate electricity to bring benefits to the owner. The universal steel structure bracket is simple, generous, fashionable and beautiful. It is a clean and...

At present, in order to promote the construction of clean, low-carbon and efficient energy system, China vigorously develop renewable energy,scale and rational develop the construction base which actively promote the development of distributed photovoltaic power generation projects. Under steady and positive development background of global large-scale photovoltaic comprehensive project, for some photovoltaic power station projects under special circumstances, labor can’t cover all aspects, to adopt low energy consumption, high precision and high stability tracking bracket solution is better than fixed bracket solution, and this may become the optimal solution. How can photovoltaic power generation be more secure and stable under the condition of limited installed capacity? Multi-point drive design, technical innovation, just choose Kseng solar tracking system. Kseng concentrated on the innovative research of solar tracking system, launched KST-2PM Double Portrait Horizontal Tracker, the setting of master and deputy control boxes greatly improves the overall adaptability and stability of the system. Based on tracking accuracy, power generation efficiency is improved, failure risk is reduced,Kseng are committed to providing customers with stable, reliable and convenient power station system. KST-2PM Multi-drive Double Portrait Horizontal Tracker solution provides a three-fold security guarantee for stability Multi-drive solution. Multipoint drive VS Singlepoint drive Two times the critical wind speed KST-2PM Double Portrait Horizontal Tracker provides a triple security guarantee for stability: First Multi-drive structure (1) The support points of the motor are increased, and the wind resistance points of the main shaft and the column are concentrated,reduce the probability of structural deformation, effectively improve system stability and reliability. (2) The natural frequency and damping ratio of the system are increased, and the structural stiffness is enhanced. Multi - point drive structure effectively reduces the amplitude of the system and greatly improve the wind resistance of the module and bracket. Second Use electric control linkage The electronically controlled linkage can detect the Angle of the actuator through the sensor to ensure the closed-loop control of the system, ensure the reliability of the system and accurate tracking Angle. Third Master and auxiliary control logic Adopt master and auxiliary control to control multiple driving motors, real-time detection and analysis of the signal of each driving point. Tracking angles can be automatically adjusted and optimized according to different Angle positions to improve tracking synchronization accuracy and ensure tracking accuracy within 土0.5°. Conclusion Kseng plough deep in the field of tracking bracket technology, constantly innovate photovoltaic tracking technology, committed to open the era of safe ...

As the global push to replace fossil fuels with clean energy, agrivoltaics have been applied as an alternative in land-constrained Japan. Located in Iwate Prefecture, Japan, this solar plant is one of the agrivoltaics projects, and it was reported by Nikkei BP, one of the largest providers of cutting-edge information, content, and services in Japan. Japan is aiming to be carbon neutral by 2050, however, the country has limited capabilities for renewable energy because of its mountainous terrain. Agrivoltaics offers a promising alternative to help farmers to generate solar electricity while growing crops on the same farmland. With a capacity of 540.21kW, the solar racking system provided by Kseng Solar serves the dual purpose of producing energy and planting 500 organic wine grapes. Featuring all highly anti-corrosion 6005-T5 aluminum alloy, the system is widely used for its durable structure, easy installation, and 6 meters large-span design according to the client’s request. Its annual electricity generation capacity is 503,000 kWh, approximately 90% of the generated power will be sold, and the rest will be used for self-consumption. With local branch and warehouse, Kseng Solar has supplied over 3GW solar racking shipments for the market, and had been keeping the best annual growth rate for seven consecutive years in Japan. Driven by the mission of” Empowering our world with clean energy ”, Kseng Solar will continue to deliver advanced and suitable solar solutions for different scenarios, to meet the increasingly diverse demands of the locals.

Happy Chinese New Year! Kseng Solar Team wishes you a healthy and prosperous Year of the Rabbit. Please note that our Chinese New Year holiday is scheduled from Jan 20th to 29th, and will resume work on Jan 30th, 2023.

December 7-8, EnerGaïa Forum, the major event for renewable energy professionals in France, was held as scheduled in Parc des Expositions de Montpellier, France. At the expo, Kseng Solar expands solar racking options with its latest solar racking solutions, especially the new universal rapid solar mounting system and easy solar bracket series. The enthusiastic response from the visitors to the Kseng products is a testimony of our commitment to France market and customers, and we aim to support the country’s 100GW solar target for 2050. Presented Products - Solar Roof Mounting Solutions: Universal rapid solar mounting systems, L feet Solar Metal Roof Mounting System, Standing Seam Roof Mounting System - Easy Solar Bracket: Universal Easy Solar Bracket, Balcony Easy Solar Bracket - Solar Ground Mounting Solutions: Aluminum Ground Mounting System, Steel Ground Mounting System It’s reported that France had reached a cumulative installed PV capacity of 15.8 GW at the end of September, with 15.5 GW of the total on the French mainland. The aggregate capacity of queued solar projects with grid-connection requests, meanwhile, has increased by 40% since the start of the year to 16.1 GW, including 3.4 GW with signed connection agreements. Dedicated to providing solar racking and tracking systems provider since 2015 and driven by the mission of “Empowering our world with clean energy”, Kseng Solar will continue to deliver more top-notch solar racking solutions to enable households, businesses, and communities across the country to benefit from sustainable energy.

November 30-December 1, Kseng Solar made its debut at the Solar Solutions Düsseldorf in Germany, the leading trade fair for solar professionals in North-Rhine Westphalia. During this 2-day visit, Kseng solar had caught the attention of visitors and industry peers with the unveiling of new universal rapid solar mounting system which is suited for European market, and the display of a variety of roof & ground solar racking solutions for both residential and C&I applications.   Besides, in order to enable more home owners get easy access for energy independence, Kseng Solar also brought universal easy solar bracket, a solution adapted for multiple scenarios, which is highly pre-assembled and can be installed at garden, balcony, railing, etc. With a recent-set warehouse in the country, Kseng Solar expects to provide sufficient capacity, fast shipping, and the best after-sales service to the local community. Presented Products -      Solar Roof Mounting Solutions: Universal rapid solar mounting systems, L feet Solar Metal Roof Mounting System, Standing Seam Roof Mounting System -      Easy Solar Bracket: Universal Easy Solar Bracket, Balcony Easy Solar Bracket -      Solar Ground Mounting Solutions: Aluminum Ground Mounting System, Steel Ground Mounting System Dedicated to providing solar racking and tracking systems provider since 2015 and driven by the mission of “Empowering our world with clean energy”, Kseng Solar will continue to deliver top-notch solar racking solutions to Germany and elsewhere markets worldwide.